Device definition
| Language: | English • magyar |
|---|
Previous chapter-> Datapoint definition / Next chapter-> Datapoint treatment
Device tree
Use right click to open popup menu. Select "Show Devices" to open device tree on the left of the screen.
CCTV video sources are listed here. In most case the tree is two level deep. In the higher level the DVR/NVR's are listed, and its children datapoints are the channels. Click on "Add device" to define a new DVR/NVR.
Device parameter
First type an alias name of the device. Then select the type of NVR/DVR in the selection list. Host is the ip address or domain name of device. Port number username and password are mandatory in most case.
Later you can modify these parameters by using popup menu on a specific device. After saving changes the device is discovered automatically. If it is available on the network, and communication is established then its channels are listed. Names of the channels are requested from device. Red, yellow, green lights indicate if the communication is OK. 
Datapoint intervention text
In treeview use popup menu to assign an intervention text to a certain datapoint. Any html file can used as intervention. In the dialog set the URL of required html. It can reside on your local computer or it can an url to an internet location.
Intervention text can be called by clicking on the left button of a record in eventlist.
Previous chapter-> Datapoint definition / Next chapter-> Datapoint treatment