Sintony configuration

Language:	English  • magyar

Previous chapter-> SNMP configuration / Next chapter-> Licensing

Sintony configuration with Sylcom

The SI410 can provide serial connectivity to Siwenoid computers on the port J10.
When in serial mode, in the System Node of the SYLCOM tool, select the following options:
Networking mode = J10
Sending Node = WUD

Than go to "arc", and Disable the protocoll!

ATC-1000 configuration

UART Setting

• Mode: RS232
• Baudrate: 9600
• Character Bits: 8
• Parity Type: none
• Stop Bit: 1
• Hardware Flow Control: none

Connecting to Siwenoid

Host: ATC-1000 ip address
Port: ATC-1000 port
User ID: 3 (This is the default administrator user in Sintony)

Browse datapoint