Siwenoid v2 INIM PrevidiaMax Modbus configuration

From Siwenoid Wiki
Revision as of 08:50, 16 October 2023 by SWNadmin2 (talk | contribs) (draft 1)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Language: English  • magyar

Siwenoid container settings:

   Parameters:

   - Host IP: IP address or hostname where the INIM PrevidiaMax panel can be found on the network.

   - Port: In case of direct ethernet connection the port number is 502. In the case of using an RS232 to TCP IP Converter, the port number can be configured in the TCP server parameters of the converter's settings.

   - Modbus address: The Modbus address of the PrevidiaMax panel can be set in the programming software of the panel called PREVIDIA-STUDIO. (See Modbus settings below)

   - Modbus RTU: In case of direct ethernet connection the value has to be set to false, in case of using an RS232 to TCP IP Converter the value has to be set to true.
Retrieved from "https://wiki.siwenoid.com/index.php?title=Siwenoid_v2_INIM_PrevidiaMax_Modbus_configuration&oldid=5866"