Datapoint treatment

Algorex datapoints are associated with treatment tables. These tables define the behavior of datapoints when different status occures. Behavior means the following associations:

• event category
• eventlist color
• name of status
• etc.

Edit treatment

Call the treatment table of a certain datapoint. Right-click on a status and select Edit treatment menu.

Edit treatment dialog contains several treatment parameters:

• Name of the treatment (en/hu): The name of a certain status in 2 languages.
• Handler type: don't change
• Datapoint type: don't change
• Bitmask: binary value. It determines the order of datapoints on treatment table and beside behaves as a status ID. It is binary because it is used in bitmask operations.
• Category: set the event category of a certain status.
• Blinking: actually it has no affect.
• Color: color is not mandatory to be identical to the color of associated category. In eventlist the color of the status can be set here.
• Effect mask: In many case a new status override the old one. Selected status in selection box will be cleared if the certain status occur.
• Command mask: commands can be enabled/disabled in case of different status.
• Default command: in eventlist the default command is associated with the status of certain record. This normally can be the most relevant command to be sent to the datapoint.

  

• Handler specific parameters: don't change.