Detectomat configuration - Revision history

SWNadmin2 at 09:08, 7 January 2014

2014-01-07T09:08:45Z

← Older revision		Revision as of 09:08, 7 January 2014
Line 11:		Line 11:
	[[Image:Tn_ATC.png\|left\|thumb\|200px]] ATC-1000's default IP address is: 192.168.2.1 The default port is: 23.		[[Image:Tn_ATC.png\|left\|thumb\|200px]] ATC-1000's default IP address is: 192.168.2.1 The default port is: 23.
	We need to connect it to the computer, and type this ip address in a web browser.		We need to connect it to the computer, and type this ip address in a web browser.
	To enter the configuration site enter the username and the password. (Default username: , password: )		To enter the configuration site enter the username and the password. (Default username: admin, password: system)
	If it allowed to access, click on "UART" menu on the left side of the site. To setting up the connection between ATC-1000 and Detectomat fire alarm system, enter the following settings:		If it allowed to access, click on "UART" menu on the left side of the site. To setting up the connection between ATC-1000 and Detectomat fire alarm system, enter the following settings:
	<br style="clear: both" />		<br style="clear: both" />

SWNadmin2 at 09:01, 7 January 2014

2014-01-07T09:01:49Z

← Older revision		Revision as of 09:01, 7 January 2014
Line 1:		Line 1:
	{{Languages\|~~Satel~~ configuration}}		{{Languages\|Detectomat configuration}}
	''Previous chapter-> [[~~Project backup/restore~~]] / Next chapter-> [[SPC6xxx configuration]]''		''Previous chapter-> [[Satel configuration]] / Next chapter-> [[SPC6xxx configuration]]''
	__TOC__		__TOC__

Line 65:		Line 65:


	''Previous chapter-> [[~~Project backup/restore~~]] / Next chapter-> [[SPC6xxx configuration]]''		''Previous chapter-> [[Satel configuration]] / Next chapter-> [[SPC6xxx configuration]]''

	[[Category:Commissioning]]		[[Category:Commissioning]]

SWNadmin2 at 08:59, 7 January 2014

2014-01-07T08:59:51Z

← Older revision		Revision as of 08:59, 7 January 2014
Line 42:		Line 42:
	Stop Bit: 1<br>		Stop Bit: 1<br>
	Hardware Flow Control: none<br>		Hardware Flow Control: none<br>
			<br style="clear: both" />

			== Setting up the fire alarm system ==
			[[Image:DetectomatFireAlarmSystem.png\|left\|thumb\|200px]]To enable communication with Detectomat fire alarm system, enter in System parameter settings on the panel. Select the parameter #16, and change the value to 6. It will enable the operation and display with new protocol.
	<br style="clear: both" />		<br style="clear: both" />

SWNadmin2 at 08:51, 7 January 2014

2014-01-07T08:51:50Z

← Older revision		Revision as of 08:51, 7 January 2014
Line 48:		Line 48:
	<br style="clear: both" />		<br style="clear: both" />

	[[Image:~~SatelConfig2~~.png\|left\|thumb\|200px]] Enter a chosen name for Detectomat fire alarm system. Select "Detectomat" in the Type, and "Detectomat-ATC" in the Protocol dropdown list if you use the ATC-1000 converter, or "Detectomat" in other case. <br>		[[Image:DetectomatContainerSettings.png\|left\|thumb\|200px]] Enter a chosen name for Detectomat fire alarm system. Select "Detectomat" in the Type, and "Detectomat-ATC" in the Protocol dropdown list if you use the ATC-1000 converter, or "Detectomat" in other case. <br>
	The Host field must be the IP of the converter's IP address, just like on the Port field.<br>		The Host field must be the IP of the converter's IP address, just like on the Port field.<br>
	<br style="clear: both" />		<br style="clear: both" />

	[[Image:~~DetectomatContainerSettings~~.png\|left\|thumb\|200px]] After you clicked on Ok button, a new container appears. Now you should have meta informations from the Detectomat fire alarm system. You can get that from the DPT application. Select one of the control units, and click on File menu -> "Export to old data(.prg + .ktx)", and save these files. Do that on each control unit.		[[Image:DetectomatProgrammingTool.png\|left\|thumb\|200px]] After you clicked on Ok button, a new container appears. Now you should have meta informations from the Detectomat fire alarm system. You can get that from the DPT application. Select one of the control units, and click on File menu -> "Export to old data(.prg + .ktx)", and save these files. Do that on each control unit.
	<br style="clear: both" />		<br style="clear: both" />
	In Siwenoid there is a Detectomat menu, which contains "Create import file". It will convert these .prg and .ktx pairs to a valid Siwenoid metafile. When all of these file pairs are converted, in the tree structure rightclick on Detectomat's container, and select "Import from Metafile". Select one of the converted files. Now you should enter the ID of the control unit. If you use one unit alone, the ID will be 200. In other case it will be the panel's Bitbus ID. Do that with each converted metafiles.		In Siwenoid there is a Detectomat menu, which contains "Create import file". It will convert these .prg and .ktx pairs to a valid Siwenoid metafile. When all of these file pairs are converted, in the tree structure rightclick on Detectomat's container, and select "Import from Metafile". Select one of the converted files. Now you should enter the ID of the control unit. If you use one unit alone, the ID will be 200. In other case it will be the panel's Bitbus ID. Do that with each converted metafiles.

SWNadmin2 at 08:51, 7 January 2014

2014-01-07T08:51:12Z

← Older revision		Revision as of 08:51, 7 January 2014
Line 51:		Line 51:
	The Host field must be the IP of the converter's IP address, just like on the Port field.<br>		The Host field must be the IP of the converter's IP address, just like on the Port field.<br>
	<br style="clear: both" />		<br style="clear: both" />
	After you clicked on Ok button, a new container appears. Now you should have meta informations from the Detectomat fire alarm system. You can get that from the DPT application. Select one of the control units, and click on File menu -> "Export to old data(.prg + .ktx)", and save these files. Do that on each control unit.
			[[Image:DetectomatContainerSettings.png\|left\|thumb\|200px]] After you clicked on Ok button, a new container appears. Now you should have meta informations from the Detectomat fire alarm system. You can get that from the DPT application. Select one of the control units, and click on File menu -> "Export to old data(.prg + .ktx)", and save these files. Do that on each control unit.
	<br style="clear: both" />		<br style="clear: both" />
	In Siwenoid there is a Detectomat menu, which contains "Create import file". It will convert these .prg and .ktx pairs to a valid Siwenoid metafile. When all of these file pairs are converted, in the tree structure rightclick on Detectomat's container, and select "Import from Metafile". Select one of the converted files. Now you should enter the ID of the control unit. If you use one unit alone, the ID will be 200. In other case it will be the panel's Bitbus ID. Do that with each converted metafiles.		In Siwenoid there is a Detectomat menu, which contains "Create import file". It will convert these .prg and .ktx pairs to a valid Siwenoid metafile. When all of these file pairs are converted, in the tree structure rightclick on Detectomat's container, and select "Import from Metafile". Select one of the converted files. Now you should enter the ID of the control unit. If you use one unit alone, the ID will be 200. In other case it will be the panel's Bitbus ID. Do that with each converted metafiles.

SWNadmin2 at 08:50, 7 January 2014

2014-01-07T08:50:04Z

← Older revision		Revision as of 08:50, 7 January 2014
Line 51:		Line 51:
	The Host field must be the IP of the converter's IP address, just like on the Port field.<br>		The Host field must be the IP of the converter's IP address, just like on the Port field.<br>
	<br style="clear: both" />		<br style="clear: both" />
			After you clicked on Ok button, a new container appears. Now you should have meta informations from the Detectomat fire alarm system. You can get that from the DPT application. Select one of the control units, and click on File menu -> "Export to old data(.prg + .ktx)", and save these files. Do that on each control unit.
	~~[[Image:SatelConfig3.png\|left\|thumb\|200px]]~~ After you clicked on Ok button, a new container appears. Now you should have meta informations from the Detectomat fire alarm system. You can get that from the DPT application. Select one of the control units, and click on File menu -> "Export to old data(.prg + .ktx)", and save these files. Do that on each control unit.
	<br style="clear: both" />		<br style="clear: both" />
	In Siwenoid there is a Detectomat menu, which contains "Create import file". It will convert these .prg and .ktx pairs to a valid Siwenoid metafile. When all of these file pairs are converted, in the tree structure rightclick on Detectomat's container, and select "Import from Metafile". Select one of the converted files. Now you should enter the ID of the control unit. If you use one unit alone, the ID will be 200. In other case it will be the panel's Bitbus ID. Do that with each converted metafiles.		In Siwenoid there is a Detectomat menu, which contains "Create import file". It will convert these .prg and .ktx pairs to a valid Siwenoid metafile. When all of these file pairs are converted, in the tree structure rightclick on Detectomat's container, and select "Import from Metafile". Select one of the converted files. Now you should enter the ID of the control unit. If you use one unit alone, the ID will be 200. In other case it will be the panel's Bitbus ID. Do that with each converted metafiles.

SWNadmin2 at 08:49, 7 January 2014

2014-01-07T08:49:26Z

← Older revision		Revision as of 08:49, 7 January 2014
Line 57:		Line 57:
	<br style="clear: both" />		<br style="clear: both" />

	Right click on the new container, and select "Enable communication". Now Siwenoid started to communicate with ~~Satel Integra~~.<br>		Right click on the new container, and select "Enable communication". Now Siwenoid started to communicate with Detectomat fire alarm system.<br>
	<br style="clear: both" />		<br style="clear: both" />

SWNadmin2 at 08:41, 7 January 2014

2014-01-07T08:41:43Z

← Older revision		Revision as of 08:41, 7 January 2014
Line 48:		Line 48:
	<br style="clear: both" />		<br style="clear: both" />

	[[Image:SatelConfig2.png\|left\|thumb\|200px]] Enter a chosen name for ~~the Integra panel~~. Select "~~Satel Integra~~" in the Type, and "~~Satel INT~~-RS" in the Protocol dropdown list. <br>		[[Image:SatelConfig2.png\|left\|thumb\|200px]] Enter a chosen name for Detectomat fire alarm system. Select "Detectomat" in the Type, and "Detectomat-ATC" in the Protocol dropdown list if you use the ATC-1000 converter, or "Detectomat" in other case. <br>
	The Host field must be the IP of the ~~ATC-1000~~'s IP address, just like on the Port field.<br>		The Host field must be the IP of the converter's IP address, just like on the Port field.<br>
	~~The User code field should contains a passcode of a master user.<br>~~
	~~Note: It will work both with a master user, and with a service user. But service user has time limitation to access the Integra panel.~~
	<br style="clear: both" />		<br style="clear: both" />

	[[Image:SatelConfig3.png\|left\|thumb\|200px]] After you clicked on Ok button, a new container appears. ~~Right~~ click on the ~~new~~ container, and select "~~Enable communication~~". Now ~~Siwenoid started to communicate~~ with ~~Satel Integra~~.<br>		[[Image:SatelConfig3.png\|left\|thumb\|200px]] After you clicked on Ok button, a new container appears. Now you should have meta informations from the Detectomat fire alarm system. You can get that from the DPT application. Select one of the control units, and click on File menu -> "Export to old data(.prg + .ktx)", and save these files. Do that on each control unit.
	~~Try to browse datapoints or start user management.~~		<br style="clear: both" />
			In Siwenoid there is a Detectomat menu, which contains "Create import file". It will convert these .prg and .ktx pairs to a valid Siwenoid metafile. When all of these file pairs are converted, in the tree structure rightclick on Detectomat's container, and select "Import from Metafile". Select one of the converted files. Now you should enter the ID of the control unit. If you use one unit alone, the ID will be 200. In other case it will be the panel's Bitbus ID. Do that with each converted metafiles.
			<br style="clear: both" />

			Right click on the new container, and select "Enable communication". Now Siwenoid started to communicate with Satel Integra.<br>
	<br style="clear: both" />		<br style="clear: both" />

SWNadmin2 at 08:25, 7 January 2014

2014-01-07T08:25:29Z

@@ Line 44: / Line 44: @@
 <br style="clear: both" />
 [[Image:SatelConfig1.png|left|thumb|200px]] In Siwenoid Client, click on the Datapoint Hierarchy tree button. Right click on the root container, and select "New container" menu.
 <br style="clear: both" />
@@ Line 56: / Line 57: @@
 Try to browse datapoints or start user management.
 <br style="clear: both" />

SWNadmin2 at 08:24, 7 January 2014

2014-01-07T08:24:32Z

← Older revision		Revision as of 08:24, 7 January 2014
Line 34:		Line 34:
	=== Connecting by Lantronix ===		=== Connecting by Lantronix ===
	To set up Lantronix please follow this guide: [[Lantronix configuration]]		To set up Lantronix please follow this guide: [[Lantronix configuration]]
			<br style="clear: both" />

	Use this settings:		Use this settings:
	Baudrate: 9600<br>		Baudrate: 9600<br>
Line 40:		Line 42:
	Stop Bit: 1<br>		Stop Bit: 1<br>
	Hardware Flow Control: none<br>		Hardware Flow Control: none<br>
			<br style="clear: both" />

	[[Image:SatelConfig1.png\|left\|thumb\|200px]] In Siwenoid Client, click on the Datapoint Hierarchy tree button. Right click on the root container, and select "New container" menu.		[[Image:SatelConfig1.png\|left\|thumb\|200px]] In Siwenoid Client, click on the Datapoint Hierarchy tree button. Right click on the root container, and select "New container" menu.