Algorex LAN communication: Difference between revisions

From Siwenoid Wiki
Jump to navigation Jump to search
(Created page with '==UDS1100 device server== Siwenoid use Lantronix UDS1100 device server to communicate with Siemens Algorex CS11 system. An UDS1100 must contain a special firmware, that is provid…')
 
No edit summary
Line 1: Line 1:
==UDS1100 device server==
==UDS1100 device server==
Siwenoid use Lantronix UDS1100 device server to communicate with Siemens Algorex CS11 system. An UDS1100 must contain a special firmware, that is provided by our company. Then Siwenoid can connect to an UDS1100 through LAN or internet. Serial port of UDS1100 is connected to the E3H020/21 gateway card of CS11 system. Gateway communication has to be set to 1200 baud and ISO1745 protocol. CS11 system can contain several control unit.
[[Image:Lantronix_gw.png‎|left|frame]] Siwenoid use Lantronix UDS1100 device server to communicate with Siemens Algorex CS11 system. An UDS1100 must contain a special firmware, that is provided by our company. Then Siwenoid can connect to an UDS1100 through LAN or internet. Serial port of UDS1100 is connected to the E3H020/21 gateway card of CS11 system. Gateway communication has to be set to 1200 baud and ISO1745 protocol. CS11 system can contain several control unit.
UDS1100 parameters can be edited through telnet (9999 port).
UDS1100 parameters can be edited through telnet (9999 port).
An application specific http://x.x.x.x/index.cgi page can be reached with any browser. It shows the application specific status of communication ports.
An application specific http://x.x.x.x/index.cgi page can be reached with any browser. It shows the application specific status of communication ports.

Revision as of 10:53, 6 May 2010

UDS1100 device server

Siwenoid use Lantronix UDS1100 device server to communicate with Siemens Algorex CS11 system. An UDS1100 must contain a special firmware, that is provided by our company. Then Siwenoid can connect to an UDS1100 through LAN or internet. Serial port of UDS1100 is connected to the E3H020/21 gateway card of CS11 system. Gateway communication has to be set to 1200 baud and ISO1745 protocol. CS11 system can contain several control unit.

UDS1100 parameters can be edited through telnet (9999 port). An application specific http://x.x.x.x/index.cgi page can be reached with any browser. It shows the application specific status of communication ports.